cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
191
Views
0
Helpful
1
Replies

Error esw_dtc_ltc4258 with 2921 and HWIC-D-9ESW

Hello all

 

I have one 2921, with HWIC-D-9ESW, and I am seeing this error on logs:

 

esw_dtc_ltc4258_reg_write : s2w timed out on unit 0 reg 0x18 data 0x22
S2W Error IIR 0x0006 ISR 0x8000
esw_dtc_ltc4258_reg_write : s2w timed out on unit 0 reg 0x18 data 0x44
S2W Error IIR 0x0006 ISR 0x8000
esw_dtc_ltc4258_reg_write : s2w timed out on unit 0 reg 0x18 data 0x88

 

Even it is working normaly, anyone have an idea of what can be causing this messages?

 

The router version:

 

RT_WAN_VICT#sh ver
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 20-Mar-12 18:57 by prod_rel_team

ROM: System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)

RT_WAN_VICT uptime is 15 weeks, 5 days, 57 minutes
System returned to ROM by bus error at PC 0x22644EB4, address 0x182BB3A5 at 15:20:25 WAT Thu Apr 23 2015
System restarted at 15:21:57 WAT Thu Apr 23 2015
System image file is "flash0:c2900-universalk9-mz.SPA.151-4.M4.bin"
Last reload type: Normal Reload


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco CISCO2921/K9 (revision 1.0) with 475136K/49152K bytes of memory.
Processor board ID FGL164710K4
9 FastEthernet interfaces
3 Gigabit Ethernet interfaces
2 terminal lines
1 Virtual Private Network (VPN) Module
2 Voice FXO interfaces
2 Voice FXS interfaces
1 Services Module (SM) with Services Ready Engine (SRE)
   Cisco Wide Area Application Services Software 4.4.3 (b4 Aug 22 2011 10:22:29) in slot/sub-slot 1/0
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)


License Info:

License UDI:

-------------------------------------------------
Device#   PID                   SN
-------------------------------------------------
*0        CISCO2921/K9         

 

Technology Package License Information for Module:'c2900'

-----------------------------------------------------------------
Technology    Technology-package           Technology-package
              Current       Type           Next reboot  
------------------------------------------------------------------
ipbase        ipbasek9      Permanent      ipbasek9
security      securityk9    Permanent      securityk9
uc            uck9          Permanent      uck9
data          None          None           None

Configuration register is 0x2102

 

 

 

Thanks

 

 

1 Reply 1

Leo Laohoo
VIP Community Legend VIP Community Legend
VIP Community Legend
System returned to ROM by bus error at PC 0x22644EB4, address 0x182BB3A5 at 15:20:25 WAT Thu Apr 23 2015

The router could be running a buggy IOS.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers