06-18-2021 10:33 PM - edited 06-19-2021 10:46 AM
I am trying to upgrade a C9300-48-UXM-E from IOS XE 16.12.03a to IOS XE 17.03.03.
I have followed all of the prerequisites and when I issue the following command:
request platform software package install switch all file flash:cat9k_iosxe.17.03.03.SPA.bin auto-copy
I get the following error:
--- Starting install local lock acquisition on switch 1 ---
Finished install local lock acquisition on switch 1
FAILED: Cannot determine list of packages for installation.
C9300_Stack_Member_3#
I have searched and I cannot find any referral to this error let alone determining it's cause.
Any help would be greatly apprciated.
06-18-2021 11:11 PM
Use the "force" option.
06-19-2021 10:31 AM
force option makes no difference.
Thx
Bryan
06-19-2021 05:37 PM
dir sh boot
06-18-2021 11:19 PM
Try installing for 1 switch at a time also can you try the new auto-copy command and see if it helps?
## Make sure to mark post as helpful, If it resolved your issue. ##
06-19-2021 09:55 AM
Hi Mohsiala,
I am only doing this on a non stack switch to test the upgrade before updating the stack and then adding this switch to the stack.
Thx
Bryan
06-19-2021 10:33 AM
Also, I am not sure what you mean by the new auto-copy command. I am using the auto-copy parameter.
What is this error trying to tell me?
06-19-2021 01:56 AM
what is the exiting installation bundle or install mode?
just to clarify are you doing upgrade standalone or stack "why i have asked - because " C9300_Stack_Member_3
if you upgrading stack you need to use
request platform software package install switch all file flash:newimage.bin new auto-copy
06-19-2021 09:58 AM
BB
This will be come the 3rd stack member but right now it is a single switch
Thx
Bryan
06-19-2021 11:11 AM
can you post show version and dir
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide