11-21-2008 06:54 PM - edited 03-06-2019 02:37 AM
hi every body!
let say we have one trunk t1 using dot1q and other trunk using isl. Can we combine these two trunk in etherchannel? or encapsulation must be same for the trunks in order to form etherchannel?
thanks a lot!
11-21-2008 07:18 PM
Sarah,
The encapsulation types must be the same to for an etherchannel bundle form. The interfaces that are configured for a port channel must be configured the same.
http://www.cisco.com/en/US/tech/tk389/tk213/technologies_tech_note09186a0080094714.shtml#topic3
HTH,
Mark
11-21-2008 10:08 PM
Hi
As Mark stated we need to have identical configs in order to join the ports in an ether-channel.
Thanks
Mahmood
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide