Examples of setting LACP between Broadcom 57xx NICs and Cat4506-E?
I am trying to get a 4 x 1GbE LAG group connected between a server with Broadcom 5709C GigE interfaces, and four 1GbE ports on a blade on my Cat4506-E.
The server NICs are running the most current versions of the Broadcom Advanced Control Suite (BASC) and the most current versions of the Broaddcom drivers. Additionally, the Cat4506-E is running the most current platform supported version
The BASC utility offers the option of setting up an the LACP group as either "Link Aggregation" or as "Generic Trunking (FEC/GEC)/802.3ad-Draft Static".
Given that these are the two LACP options available for configuring the Broadcom driver for LACP, should the channel-group mode for the GigE ports on the 4506-E be configured for 'mode active' or 'mode on'?
And are there any best practice examples for how to best configure the LACP channel between these particular OEM NICs and the 4506-E?
The 2020 IT Blog Awards, hosted by Cisco, is now open for submissions through October 16. Submit your blog, vlog or podcast today. For more information, including category details, the process, past winners and FAQs, check out: https://www.cisco...
Hello,We have a pair of N3K-3064PQ-10GX and one of them acting as backup and we want to migrate from VyOS to it, we want to add 500x interface vlan and each interface vlan has its own ip/prefixes (for example /30 /29 ...) and we ahve 6-8x BGP session with...
We live in an age that is both thrilling and evolving substantially. A new trend/technology is always on rise even before the preceding has been used to its fullest potential. Although the concepts of digital transformation may seem over discussed, ...
Show CommandPurposeCiscoICX-RuckusShow Spanning tree infoShow spanning-treeshow 802-1wVerify Port-Channel / Link aggregation infosh lag briefsh etherchannel summaryShow CDC/LDP neighbor infoshow cdp neighbors detailsh lldp neighbors de sh mac a...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.