Exclude logs in the archive logs

[ariask93]

Hey guys!

Is there a way to exclude some logs into the archive logs.

this is my actual config:

archive
  log config
  logging enable
  logging size 400
  notify syslog contenttype plaintext

I just wanted to exclude this log that is really overriding some important logs.

1537 0 dnacenter@vty0 |!exec: enable
1538 0 dnacenter@vty0 |!exec: enable
1539 0 dnacenter@vty0 |!exec: enable
1540 0 dnacenter@vty0 |!exec: enable
1541 0 dnacenter@vty0 |!exec: enable
1542 0 dnacenter@vty0 |!exec: enable
1543 0 dnacenter@vty0 |!exec: enable
1544 0 dnacenter@vty0 |!exec: enable
1545 0 dnacenter@vty0 |!exec: enable
1546 0 dnacenter@vty0 |!exec: enable
1547 0 dnacenter@vty0 |!exec: enable
1548 0 dnacenter@vty0 |!exec: enable
1549 0 dnacenter@vty0 |!exec: enable
1550 0 dnacenter@vty0 |!exec: enable
1551 0 dnacenter@vty0 |!exec: enable
1552 0 dnacenter@vty0 |!exec: enable
1553 0 dnacenter@vty0 |!exec: enable
1554 0 dnacenter@vty0 |!exec: enable
1555 0 dnacenter@vty0 |!exec: enable
1556 0 dnacenter@vty0 |!exec: enable
1557 0 dnacenter@vty0 |!exec: enable
1558 0 dnacenter@vty0 |!exec: enable
1559 0 dnacenter@vty0 |!exec: enable
1560 0 dnacenter@vty0 |!exec: enable
1561 0 dnacenter@vty0 |!exec: enable
1562 0 dnacenter@vty0 |!exec: enable
1563 0 dnacenter@vty0 |!exec: enable
1564 0 dnacenter@vty0 |!exec: enable
1565 0 dnacenter@vty0 |!exec: enable
1566 0 dnacenter@vty0 |!exec: enable
1567 0 dnacenter@vty0 |!exec: enable
1568 0 dnacenter@vty0 |!exec: enable
1569 0 dnacenter@vty1 |!exec: enable
1570 0 dnacenter@vty0 |!exec: enable
1571 0 dnacenter@vty0 |!exec: enable
1572 0 dnacenter@vty0 |!exec: enable
1573 0 dnacenter@vty0 |!exec: enable
1574 0 dnacenter@vty0 |!exec: enable
1575 0 dnacenter@vty0 |!exec: enable
1576 0 dnacenter@vty0 |!exec: enable
1577 0 dnacenter@vty0 |!exec: enable
1578 0 dnacenter@vty0 |!exec: enable
1579 0 dnacenter@vty0 |!exec: enable
1580 0 dnacenter@vty0 |!exec: enable
idx sess user@line Logged command

1581 0 dnacenter@vty0 |!exec: enable
1582 0 dnacenter@vty0 |!exec: enable
1583 0 dnacenter@vty0 |!exec: enable
1584 0 dnacenter@vty0 |!exec: enable
1585 0 dnacenter@vty0 |!exec: enable
1586 0 dnacenter@vty0 |!exec: enable
1587 0 dnacenter@vty0 |!exec: enable
1588 0 dnacenter@vty0 |!exec: enable
1589 0 dnacenter@vty0 |!exec: enable
1590 0 dnacenter@vty0 |!exec: enable
1591 0 dnacenter@vty0 |!exec: enable
1592 0 dnacenter@vty0 |!exec: enable
1593 0 dnacenter@vty0 |!exec: enable
1594 0 dnacenter@vty0 |!exec: enable
1595 0 dnacenter@vty0 |!exec: enable
1596 0 dnacenter@vty0 |!exec: enable

[MHM Cisco World]

Check below 

MHM

[Flavio Miranda]

@ariask93 

Try this

logging discriminator TEST msg-body drops  "dnacenter@vty0"

logging buffered discriminator TEST

[ariask93]

It exclude from the log but not into the archive log. I have tested.

[Flavio Miranda]

It should be enough right?

 Your archive is overwrite, right? if you exclude from logging, it will not be on the archive soon.

[ariask93]

it still writing in the archive log, I dont know why.

[MHM Cisco World]

archive
 log config
  logging enable
  logging size 200
  notify syslog contenttype plaintext
  hidekeys
!
login on-failure log
login on-success log <<- this I think you need to disable 
logging userinfo

If ypu config above check my note 

MHM

[ariask93]

I doesn't work :c maybe I just have to accept it.

[MHM Cisco World · Accepted solution]

sorry what is not work, do you still see exec:enable ?

MHM

[ariask93]

Yeah! I'm still seen it.