03-24-2015 07:47 PM - edited 03-07-2019 11:15 PM
Hello experts,
I have several Vlans, eg: Vlan221, VLan222, VLan223, VLan224, Vlan225 with subnetmask /24 and only created ACLs for only VLan225 and applied access-group "in" for this vlan interface.
Now i used almost IP address in VLan225(no more ip address), and want to extend a IP address for this vlan but i do not how to do. I suggested:
1. Create a new vlan226 and applied ACLs existed(ALCs from Vlan225) to this VLan interface
2. increase or decrease subnetmask?
3. what's else?
Any help is very very appreciated,
Best regards,
Solved! Go to Solution.
03-24-2015 08:10 PM
Hello Trung Minh,
Answer 1 is correct. Assign new network for new vlan and apply ACLs based on your requirement.
Regards,
Minh
03-24-2015 08:10 PM
Hello Trung Minh,
Answer 1 is correct. Assign new network for new vlan and apply ACLs based on your requirement.
Regards,
Minh
03-24-2015 11:26 PM
Hello Minh,
I did as you recommended but i can not find sharing files between Vlan225 and 226 while ping or remote desktop are fine.
Do i need to create more access list between them? How it look like?
Any help is appreciated,
Regards,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide