cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
6626
Views
4
Helpful
3
Replies
Highlighted
Explorer

Fanless 24 Port Switch options?

Does Cisco have a full featured layer2 (or layer3) 24 port switch that is fanless?  I'm looking for something similar in features to the 2960 C Compact Switches that max out at 12 10/100 ports and 2 Gigabit uplinks on the WS-C2960C-12PC-L models and have a heatsink rather than fan.

Ideally it would be nice to have POE on a 24 10/100 port version with a  couple SFP ports.  I thought I saw something similar to this a while back on Cisco's site but can't seem to find it again. 

 

Is there such a switch available?

 

Jim

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Hall of Fame Community Legend

Then only Cisco 24-port

Then only Cisco 24-port FANLESS switch I know of is WS-C2960X-24PSQ.  It comes in two forms, LAN Lite or LAN Base.  

 

In regards to PoE, the answer is a "maybe":  92 w PoE so this means you have 3 ports PoE+ (up to 30w per port) or 6 ports PoE (up to 15.4w PoE).

View solution in original post

3 REPLIES 3
Highlighted
Hall of Fame Community Legend

Then only Cisco 24-port

Then only Cisco 24-port FANLESS switch I know of is WS-C2960X-24PSQ.  It comes in two forms, LAN Lite or LAN Base.  

 

In regards to PoE, the answer is a "maybe":  92 w PoE so this means you have 3 ports PoE+ (up to 30w per port) or 6 ports PoE (up to 15.4w PoE).

View solution in original post

Highlighted
Rising star

You could also look at the

You could also look at the Industrial Grade switches. The one below has 8 x PoE and16 SFP ports.

I'm not sure what your use case is but these switches are designed for use in high temperature environments.

http://www.cisco.com/c/en/us/products/collateral/switches/industrial-ethernet-3010-series-switches/datasheet_c78-637080.html

Highlighted
Explorer

Thanks the WS-C2960X-24PSQ

Thanks the WS-C2960X-24PSQ was the one I was thinking of.  The big downside is the limited POE power, but they still might be useful in certain applications. 

 

Jim

CreatePlease to create content
Content for Community-Ad