Fex Uplink Port Mapping 9k & 2k

[Michael Kozak]

I'm trying to update Visio documentation for our Nexus 9K & 2K environment.  I'm trying to find which Uplink Port on the 2K is connected to which Fabric Port on the 9K.  From show interface fex-fabric I can see the port on the 9K is Eth1/19, but Fex Uplink 9 I don't follow there are only 4 uplink for on our 2K ports 2/1-4

show interface fex-fabric 

         Fabric   Fabric Fex     FEX
Fex Port Port State Uplink Model 
---------------------------------------------------------------
101 Eth1/19 Active 9 N2K-C2348TQ-10GE

show fex 101 transceiver 

Fex Uplink: 9
Fabric Port: Ethernet1/19
transceiver is not present

[Reza Sharifi]

Not sure what you are asking. Are you asking about port number on the FEX?

[Michael Kozak]

Yes

[Reza Sharifi]

The fex uplink (from the fex side) is fi1, fi2, etc..

fi1=fex interface 1.

HTH

[Michael Kozak]

Thanks but how do I know which port on the 2K it is connected to.  On the 9k its Eth1/19 but what port is that connected to on the 2K is it fi1, fi2?