Fibre Connector questions.

[ROBERT TOGONON]

Right now all our campus are using 62.5 micron fibre cables using SX GBIC termination. We are going to implement a 50 micron fibre cable on our new building, my question is. Do I need to add a specialize termination on the SX GBIC connector? Or if someone can point me to the right direction I would appreciate. Hope my question is understandable.

[Georg Pauwen]

Hello,

the SX GBIC works with 62.5 and 50.0 micron core sizes, so you do not need to add or change anything.

Check this link for a feature comparison of the various GBICs (scroll down to ´Table 1 Cisco GBIC Port Cabling Specifications´):

Cisco Gigabit Interface Converter

http://www.cisco.com/en/US/partner/products/hw/modules/ps872/products_data_sheet09186a008014cb5e.html

Regards,

GP

[ROBERT TOGONON]

GP,

Thanks for the reply. Can you send the links again please?

Regards,

RT

[ROBERT TOGONON]

Ohh...never mind. I've got it.

Thank you,