12-23-2004 09:30 AM - edited 03-05-2019 11:22 AM
Right now all our campus are using 62.5 micron fibre cables using SX GBIC termination. We are going to implement a 50 micron fibre cable on our new building, my question is. Do I need to add a specialize termination on the SX GBIC connector? Or if someone can point me to the right direction I would appreciate. Hope my question is understandable.
12-23-2004 11:50 AM
Hello,
the SX GBIC works with 62.5 and 50.0 micron core sizes, so you do not need to add or change anything.
Check this link for a feature comparison of the various GBICs (scroll down to ´Table 1 Cisco GBIC Port Cabling Specifications´):
Cisco Gigabit Interface Converter
Regards,
GP
12-23-2004 12:51 PM
GP,
Thanks for the reply. Can you send the links again please?
Regards,
RT
12-23-2004 12:58 PM
Ohh...never mind. I've got it.
Thank you,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide