cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
141
Views
0
Helpful
1
Replies
Highlighted

Filter Packet PPPoE Discovery

Hello 

i have a sw nexus 

i have a router BGN with vlan 50 is going to sw then mode access to Client 1 and Client 2

 

BNG ==== SW1 == PORT1 =Client 1 (Mode access vlan 50)

                              PORT2 =Client 2 (Mode access vlan 50)

 

the have connected to BNG by pppoe and everything is ok 

but the problem is 

when Client 1 try to connect  to BNG  , is send a PADI packet , it's a broadcast  , so this packet is going to Client 2 and to BNG Router

i need some filter apply in Port 1 ( outbound) so is just filter Any  PADI packet to go to client

so the Port 1 and 2 they just only can send PADI message and not do not receive it it from another Client . 

 

 

 

1 REPLY 1
Highlighted
Hall of Fame Expert

Hi,

How about putting each client in a different vlan like this/

BNG ==== SW1 == PORT1 =Client 1 (Mode access vlan 50)

                              PORT2 =Client 2 (Mode access vlan 51)

Content for Community-Ad