Firewall & Switches

[sachinc01]

Dear Sir,

I have following device ASA5508-FPWR-BUN X 1No
Catalyst 9300 48-port PoE+ X 3Switches now I want to configured 2 IP scope & DHCP for both IP scope on firewall & on the switch  2 VLAN .

On the Firewall I have configured 2 LAP IP (192.168.1.X,172.16.16.X)& also DHCP scope & firewall both cable connect to switch port 24 & 45, 46 -48 are the trunk port to connect another switches.

now on the switch I have configured 2 VLAN 172 & 192 port 1-24 port for 172 VLAN 24-45 port for 192 vlan.

I able to get DHCP & working but i have get both range ip through LAN or wifi which i not need i need only 192 scope for use & 172 range for CCTV only.

Can some one guide which configuration i will need or what changes i will need.........

[balaji.bandi]

as long as the en device connected to right access port they get respectected DHCP client IP.

can you post switch config. tell use where the cctv and other devices connected.