08-20-2012 04:25 AM - edited 03-07-2019 08:26 AM
Hi
I have a cisco 6509 switch in which i have 2 SUPs. I am using 3 Qty. of WS-X6748-GE-TX in the same switch.
First 24 ports of module 1 and are not working. I replace the faulty moldule with the working one but now the new (good) module's first 12 ports stopped working. But when I insert the good card (the replaced one with the faulty) in other chassis it works fine.
Cheers
Rahul
08-20-2012 10:02 AM
Hi,
Since the blade works fine in one chassis and not the other, take a look at the pins in the bad chassis's backplane and make sure they are all straight and not bent. Also try putting the blade in a different slot in the bad chassis and test.
HTH
08-20-2012 03:51 PM
Run an online diagnostics on the module.
I've got a strange feeling the backplane of the chassis could be failing.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide