Forget System of router

[omar Alqadi]

Hi;

i have router 2911 and i can't access by  Username and password for  first time open

when i tried to recovery of password ,i removed compact flash and i run the system ,

Once the router is on Rommon mode, i reinsert the compact flash,

i Type confreg 0x1b340 instead of  Type confreg 0x2142  and i Type reset

after  reboot  the ios forget as per attached picture  .

i try same Steps but the problem still.

please we need solution to return System

Regards

[Eric23]

Change the speed rate of the console cable 1200

[Spooster IT Services]

Hi,

Here is the link which guide you for the password recovery process.

Below is the default settings for serial line 

• Bits per sec: 9600

• Data bits: 8

• Parity: none

• Stop bits: 1

• Flow control: none

You can try changing these values or Bits per sec for the issue you are facing.