cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
434
Views
0
Helpful
2
Replies
burhan.agir
Beginner

General IGMP query messages not shown

Hi,

 

 

I am using 3850 series switch and software version is 3.6.6. Also I am using multicast traffic on these 2 stack switches. When I am check the multicast query messages on wireshark I can see that general query message (224.0.0.1) every 60 seconds. Also I can see other igmp static query messages between same interval. When I shutdown the master switch, during about 140 second general query messages not shown and I could not get information from some systems that is not using static igmp. During this time I could not see 224.0.0.1 messages on wireshark and get any information because of this. But I can see static query messages in same period.

After 7-8 seconds later from shutdown static igmp query messages was send again but general message was not.

 

I did this test on 3.7.4 but I did not see any problem just like.

 

1- general and static query message interval time is 60 seconds?

2- what is the possible reason of this problem?

 

Is there anybody for help me about that?

 

Thanks,

2 REPLIES 2
maza2k2
Beginner

Hi, I have this problem too. Do you know solution ?

Hi,

Absolutely no.

Thanks