cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
143
Views
0
Helpful
1
Replies
shibi.er
Beginner

Getting lots of messages SNMP monitor

We are getting lots of messages like following. I can't figure out the same. Can anybody suggest how to stop this.

EVENT ID = 00019R9

ALERT ID = 00009V1

TIME = Fri 18-Jul-2008 16:14:01 AST

STATUS = Cleared

SEVERITY = Informational

MANAGED OBJECT = WH_Dist

MANAGED OBJECT TYPE = Switches and Hubs

EVENT DESCRIPTION = Unresponsive::Component=10.104.7.254 [WH_Dist];IPStatus=OK;InterfaceName=IF-WH_Dist/89 [Vl2007] [10.104.7.254] [.WHE_HISUserSup. ];InterfaceType=PROPVIRTUAL;InterfaceOperStatus=UP;NetworkNumber=10.104.7.0;InterfaceMode=NORMAL;InterfaceAdminStatus=UP;Address=10.104.7.254;

CUSTOMER IDENTIFICATION = All_Devices_Unresponsive

CUSTOMER REVISION = 1

1 REPLY 1
Steve Lyons
Beginner

These appear to be occurring on a network management tool. If so then you should either disable the reporting of these messages within the network management tool or you will need to disable SNMP traps on the equipment you are monitoring.

Steve Lyons - Cisco