All,
I hope you are well and can assist with the following
WE plan to carry out DR testing and a UPS upgrade unfortunatley the server room will have no power for a couple of minutes.
Is there a gracefull way to shut down the Nexus 7009 (We have an admin VDC / two additional VDCs) or do we just switch of the power supplies on the Nexus 7009 ?
From Sh version below
Software
BIOS: version 2.12.0
kickstart: version 6.2(2)
system: version 6.2(2)
BIOS compile time: 05/29/2013
kickstart image file is: bootflash:///n7000-s2-kickstart.6.2.2.bin
kickstart compile time: 7/9/2013 20:00:00 [08/22/2013 04:51:27]
system image file is: bootflash:///n7000-s2-dk9.6.2.2.bin
system compile time: 7/9/2013 20:00:00 [08/22/2013 08:07:03]
Hardware
cisco Nexus7000 C7009 (9 Slot) Chassis ("Supervisor Module-2")
Intel(R) Xeon(R) CPU with 12224956 kB of memory.
WE will take backups for the (vlan.dat files / Flash / running config)
Your response is much appreciated
Kind Regards,
Zeeshan
