06-02-2016 07:38 PM - edited 03-08-2019 06:03 AM
i have a cisco 6509-E chassis with VS-SUP2T-10G with VS-F6K-MSFC5;VS-F6K-MSFC5.. does it support WS-X6716-10G-3C & WS-X6716-10G-3CXL ?
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAL1203DEJL
4 24 CEF720 24 port 1000mb SFP WS-X6824-SFP SAL1826VJ4G
5 5 Supervisor Engine 2T 10GE w/ CTS (Acti VS-SUP2T-10G SAL1825UZQ4
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 001e.be82.39bc to 001e.be82.39d3 3.1 12.2(18r)S1 15.1(2)SY2 Ok
4 d072.dcfe.6f30 to d072.dcfe.6f47 2.3 12.2(18r)S1 15.1(2)SY2 Ok
5 503d.e514.001a to 503d.e514.0021 2.1 12.2(50r)SYS 15.1(2)SY2 Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 Centralized Forwarding Card WS-F6700-CFC SAL1203DA99 4.0 Ok
4 Distributed Forwarding Card WS-F6K-DFC4-A SAL1826VJ4G 2.3 Ok
5 Policy Feature Card 4 VS-F6K-PFC4 SAL1825V8LE 2.1 Ok
5 CPU Daughterboard VS-F6K-MSFC5 SAL1824UUDC 3.0 Ok
Solved! Go to Solution.
06-03-2016 02:01 AM
Yes the DFC4-A will support those cards doc attached , I didn't see you had the dfc4 in original post
06-03-2016 12:28 AM
You need a different daughter card as below
http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/catalyst-6500-series-supervisor-engine-2t/data_sheet_c78-648214.html
Table 5. Product Specifications
06-03-2016 12:33 AM
Hi Mark,
Thanks for the response
so u suggesting me to go for the below linecards as it will support with my supervisor?
• WS-X6716-10G-3C, WS-X6716-10G-3CXL
• WS-X6716-10T-3C, WS-X6716-10T-3CXL
Because supervisor running with PFC4 and one linecard already running with DFC-A
06-03-2016 02:01 AM
06-03-2016 02:50 AM
Thanks mark..
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
5 5 Supervisor Engine 2T 10GE w/ CTS (Acti VS-SUP2T-10G SAL1825UZQ4
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
5 503d.e514.001a to 503d.e514.0021 2.1 12.2(50r)SYS 15.1(2)SY2 Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
5 Policy Feature Card 4 VS-F6K-PFC4 SAL1825V8LE 2.1 Ok
5 CPU Daughterboard VS-F6K-MSFC5 SAL1824UUDC 3.0 Ok
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide