11-03-2010 09:57 PM - edited 03-06-2019 01:52 PM
Help me config Nat use with GLBP, HSRP as :
Solved! Go to Solution.
11-04-2010 02:09 AM
Hi Mark,
Check out the below link for HSRP implementation along with NATTING configuration,
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t4/feature/guide/ftnthsrp.html
Hope to Help !!
Ganesh.H
Remember to rate the helpful post
11-04-2010 02:09 AM
Hi Mark,
Check out the below link for HSRP implementation along with NATTING configuration,
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t4/feature/guide/ftnthsrp.html
Hope to Help !!
Ganesh.H
Remember to rate the helpful post
11-04-2010 06:38 PM
Thank ganeshh.iyer ! If i config GLBP, and run load balancing 2 router, does i config nat run ?
11-05-2010 06:32 AM
Thank ganeshh.iyer ! If i config GLBP, and run load balancing 2 router, does i config nat run ?
Hi,
Check out the below link for glbp configration with NAT
https://supportforums.cisco.com/message/787346#787346
Hope to Help !!
Ganesh.H
11-05-2010 12:33 AM
Wonderful link Ganesh it's really helpful and always thanks for ur valuable inputs
Muller
11-05-2010 06:35 AM
Thanks Muller , I am really happy it has helped u out !!
Ganesh.H
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide