Help with Various Errors on Port Channel

[mctiesman]

I have a port channel setup with each of the member ports reporting various errors.  Here is what I have for each port using the show int counters errors command:

Port        Align-Err     FCS-Err    Xmit-Err     Rcv-Err  UnderSize  OutDiscards

Gi1/0/1             0        1582           0        1582          0      1637667

Port      Single-Col  Multi-Col   Late-Col  Excess-Col  Carri-Sen      Runts     Giants

Gi1/0/1            0          0          0           0          0          0          0

Port        Align-Err     FCS-Err    Xmit-Err     Rcv-Err  UnderSize  OutDiscards

Gi2/0/1             0        4456           0        4456          0      2704033

Port      Single-Col  Multi-Col   Late-Col  Excess-Col  Carri-Sen      Runts     Giants

Gi2/0/1            0          0          0           0          0          0          0

This port channel is an uplink to another switch.  Can someone help me figure out what might be the issue in relation the errrors being displayed? Thanks!!

[glen.grant]

  Looks like a physical issue , try changing the media in the path between those 2 devices.  Are these gig links or lower speed ?

[darren.g]

I'm with Glen. FSC errors are Frame Check Sequence errors - these usually indicate bad cabling. if these are 1 gig ports, change your cabling to Cat5E at minimum (Cat6 is better) and check your termiantions etc if they're punch panels.

Cheers

[mctiesman]

Excellent. I figured it would be something easy. Thanks for the replys.

[Leo Laohoo]

If Gig 1/0/1 is copper, then run a simple TDR. 

Post the output of the command "sh cable tdr int Gi1/0/1" if you want some assistance.