cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
742
Views
0
Helpful
2
Replies

High latency with strange patrol

samsita
Level 1
Level 1

Dear experts

I have several AP´s working with WLC 4400 series. The workstation with Cisco PCI wifi cards detect high latency when I ping several servers. It´s strange because always is the same patrol of high latency. Each 20 sec 3 peaks of high latency in all workstation in differents areas. below sample. I wired connected the workstation and I don´t get high latency, only on wireless


Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time=1ms TTL=126
Reply from 10.137.221.22: bytes=32 time=100ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time=18ms TTL=126
Reply from 10.137.221.22: bytes=32 time=111ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time=34ms TTL=126
Reply from 10.137.221.22: bytes=32 time=127ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126

I add that the ping is from worstation connected with wireless to other server connected to other SW. There are not firewall.in the middle just 2 routers with HRSP

I also launch ping to other server in the same network with the same high latency

Model of AP  AIR-LAP1242AG-E-K9 with 2.4 Ghz

I ping from Cisco SW to server and I get normal latency

Thanks in advanced

2 Replies 2

samsita
Level 1
Level 1

any help? thanks

Ganesh Hariharan
VIP Alumni
VIP Alumni

Dear experts

I have several AP´s working with WLC 4400 series. The workstation with Cisco PCI wifi cards detect high latency when I ping several servers. It´s strange because always is the same patrol of high latency. Each 20 sec 3 peaks of high latency in all workstation in differents areas. below sample. I wired connected the workstation and I don´t get high latency, only on wireless


Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time=1ms TTL=126
Reply from 10.137.221.22: bytes=32 time=100ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time=18ms TTL=126
Reply from 10.137.221.22: bytes=32 time=111ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time=34ms TTL=126
Reply from 10.137.221.22: bytes=32 time=127ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126
Reply from 10.137.221.22: bytes=32 time<1ms TTL=126

I add that the ping is from worstation connected with wireless to other server connected to other SW. There are not firewall.in the middle just 2 routers with HRSP

I also launch ping to other server in the same network with the same high latency

Model of AP  AIR-LAP1242AG-E-K9 with 2.4 Ghz

I ping from Cisco SW to server and I get normal latency

Thanks in advanced

Hi,

With the observation whihc you have told that means some where in the network one of the device is having high utilization that why all are getting same behavior at same time.Have you checked the CPU or logs in AP which are serving for network connectivity for users.

HTH

Ganesh.H

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco