cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1227
Views
0
Helpful
2
Replies

How can I break a boot loop in a 6880-X-LE

shawn.murphy1
Level 1
Level 1

I have a 6880-X-LE chassis that is stuck in a continuous boot loop.

We moved the pair back from VSS to Standalone, and upon reload of the secondary chassis it stuck in a looping boot cycle that does not stop.

It's not finding a bootable image and I can't appear to break it even to Rommon.

This is the output:

15:41:20 UTC Thu Apr 28 2016: General Protection Fault Exception: : vector D, PC = 0x30E54FF

-Traceback= 30E54FF 495792D 4E7B809 4E7B291 4E7C074 4E7BF85 4E7C4A8

Preempted contexts:

CPU Register Context:
EAX = 0x00000000 ECX = 0x14C6F105 EDX = 0x0680ED10 EBX = 0x6D000000
ESP = 0x12B7DFF8 EBP = 0x12B7E030 ESI = 0x0F1F6128 EDI = 0x28611F0F
EIP = 0x030E54FF PS = 0x00010212 CS = 0x00000008 SS = 0x00000010
DS = 0x00000010 ES = 0x00000010 FS = 0x00000010 GS = 0x00000010
File _20160428-154120-UTC Device Error :No such device

*** System received a Bus Error exception ***
signal= 0xa, code= 0xd, context= 0xdf0a0b8
PC = 0x100008, Vector = 0x0, SP = 0x12b7dff8

Cisco Governator Rommon version 1.1

System Initializing ...


System Bootstrap, Version 15.1(02)SY01 [ Rel 1.1], RELEASE SOFTWARE
Copyright (c) 1994-2013 by cisco Systems, Inc.

Current image running: Governator Boot Rom :Upgradable Region

Last reset cause: Software Reset, reset code 0x4

Governator platform with 2097152 Kbytes of main memory

#Booting c6880x-ipservicesk9-mz.SPA.152-1.SY1a.bin ...
################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################
ELF image verification PASSED

Self extracting the image... [OK]

Self decompressing the image : ################################################################################################################################################################################################################################################################################################################################################################################################################################################################ [OK]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Cisco IOS Software, c6880x Software (c6880x-IPSERVICESK9-M), Version 15.2(1)SY1a, RELEASE SOFTWARE (fc6)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Tue 29-Sep-15 15:27 by prod_rel_team

Starting EOBC Switch Initialization
EOBC Switch Initialization is done!

2 Replies 2

Philip D'Ath
VIP Alumni
VIP Alumni

It looks like it is finding a bootable image to me.

Hopefully you have a Cisco maintenance contract like SmartNet.  I think you next step should be to contact Cisco TAC with a view to getting an RMA unit.

Mark Tizzard
Level 1
Level 1

Hi

I know this thread is a year old now, but did you have resolution on this?

Mark

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card