cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
685
Views
0
Helpful
1
Replies

How can I configration ip cache flow on the C6500?

seungmin Lee
Beginner
Beginner

I want to see net flow data.

I have configured this command on the c6500.

but I can to see data only below...

How can I configration ip cache flow on the C6500?

what is the problem?

int gi4/31

ip add x.x.x.x

ip route-cache flow

c6500# show ip cache flow

Displaying software-switched flow entries on the MSFC in Module 5:

IP packet size distribution (6108 total packets):
   1-32   64   96  128  160  192  224  256  288  320  352  384  416  448  480
   .000 .454 .028 .461 .000 .000 .000 .007 .000 .000 .048 .000 .000 .000 .000

    512  544  576 1024 1536 2048 2560 3072 3584 4096 4608
   .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000

IP Flow Switching Cache, 278544 bytes
  1 active, 4095 inactive, 2967 added
  81020 ager polls, 0 flow alloc failures
  Active flows timeout in 30 minutes
  Inactive flows timeout in 15 seconds
IP Sub Flow Cache, 33992 bytes
  0 active, 1024 inactive, 0 added, 0 added to flow
  0 alloc failures, 0 force free
  1 chunk, 20 chunks added
  last clearing of statistics never
Protocol         Total    Flows   Packets Bytes  Packets Active(Sec) Idle(Sec)
--------         Flows     /Sec     /Flow  /Pkt     /Sec     /Flow     /Flow
TCP-Telnet          18      0.0        78    40      0.0      18.4       8.8
TCP-WWW              2      0.0         3    50      0.0       8.0       8.7
TCP-other           14      0.0         3    50      0.0       9.5      15.4
UDP-other         2918      0.0         1   114      0.0       0.7      14.7
IP-other            14      0.0        28    60      0.0     126.5       3.9
Total:            2966      0.0         1    91      0.0       1.5      14.6

SrcIf         SrcIPaddress    DstIf         DstIPaddress    Pr SrcP DstP  Pkts
Gi6/47        10.34.70.2      Null          224.0.0.10      58 0000 0000   325

-------------------------------------------------------------------------------

Displaying hardware-switched flow entries in the PFC (Active) Module 5:
SrcIf            SrcIPaddress     DstIf            DstIPaddress    Pr SrcP DstP

  Pkts

1 Reply 1

John Blakley
Advisor
Advisor
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers