06-29-2010 06:10 AM - edited 03-06-2019 11:48 AM
Hi everybody,
I have four 3com switches which are connected on my catalyst 2950.
Now I want to know on my LAN what's the traffic ( input and output rate) of each equipment in my LAN connected on the catalyst with his ip address to identify the equipement.
How can I get it in CLI on my catalyst?
Please help me because i suspect on my LAN a machine which is not a server to overload the network.
Thank you for your help
06-29-2010 02:22 PM
The hardware at hand does not provide that level of information from the CLI. You will need some 3rd pary utility that queries the switch via SNMP.
I suggest doing a google search on it.
Regards,
Edison
06-30-2010 05:13 AM
Thank you for your response
But about this subject i'm looking for CiscoWorks network management software which is defined likes a NMS for SNMP Manager but I do not find it on the cisco website.
What is his new equivalent on the Support section on the cisco website?? Or can You give me another software wich doing same thing?
Thank you again
06-30-2010 09:16 AM
We do have a section on this website that relates to CiscoWorks, please start a new thread there and you will find more qualified help.
Regards,
Edison
07-02-2010 05:02 AM
Thanks for your response,
I do what you told me to do but no response yet since yesterday.
I hope somebody will answer me.
Any way does it exist another way to obtain response on this forum (I think to ask directly ton an CSC expert)?
Regards
07-02-2010 05:47 AM
hi check with this command.
#show control-plane host open-ports
.
07-02-2010 10:30 AM
Hi
sorry but this command does not work and I have a switch catalyst 2950.
I think this command is not appropriate with this model.
User Access Verification
Password:
CATALYST#sh
CATALYST#show controllers
CATALYST#show control-plane host open-ports
^
% Invalid input detected at '^' marker.
CATALYST#
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide