cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

792
Views
0
Helpful
5
Replies
Highlighted
Cisco Employee

How do I enable NBAR on Cisco 6509-E Sup2T ???

I'm running VSS of 6509-E Sup2T with IOS 15.0(1)SY6 Advance Enterprise.

The command that I'm familiar with "ip nbar" does not exist.

how can I activate it ? and how can I update it ?

I'd like to use it for netflow export.

Everyone's tags (1)
5 REPLIES 5
Engager

When you configure flexible

When you configure flexible netflow, flow record I think you can input an application name

ie

conf t

!

flow record xyz

match application name xyz

See here

Please rate useful posts & remember to mark any solved questions as answered. Thank you.
Cisco Employee

thanks for your help.

thanks for your help.

unfortunately, this command doesn't work.

more than that - I can't even use the command "ip nbar <something>" in order to update the nbar.

does 6500 platform support NBAR ?

VIP Expert

I don't believe "ip nbar"

I don't believe "ip nbar" command is supported on the 6500.  I tried it on a 6800 with sup 2T and no luck.

HTH

VIP Expert

See this link. NBAR command

See this link. NBAR command is not supported

http://www.cisco.com/c/dam/en_us/training-events/le21/le39/docs/tdw108_qa.pdf

HTH

Engager

The command you are

The command you are comfortable with is no longer available.
From this link I got the command reference for application.

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/15-2SY/config_guide/sup2T/15_2_sy_swcg_2T/netflow_hw_support.html?bookSearch=true

http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/fnetflow/command/fnf-cr-book/fnf-c1.html#wp2697790240

match/collect application name

To configure the use of the application name as a key field for a flow record, use the match application name command in flow record configuration mode. To disable the use of the application name as a key field for a flow record, use the no form of this command. 

match/collect application name

no match/collect application name

Command History

Release 

Modification 

15.0(1)M 

This command was introduced. 

15.2(2)T 

15.2(3)T

This command was integrated into Cisco IOS Release 15.2(2)T for Cisco Performance Monitor. 

Cisco IOS XE Release 3.5S 

This command was integrated into Cisco IOS XE Release 3.5S for Cisco Performance Monitor.

Please rate useful posts & remember to mark any solved questions as answered. Thank you.
CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards