cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
3558
Views
0
Helpful
10
Replies
csaravanan-sym
Beginner

How to access MSFC in 6509 Switch

Hi,

We have a 6509 switch with Sup-II module. Just wondering how I can login to the MSFC and configure routing

Please help

2 ACCEPTED SOLUTIONS

Accepted Solutions

The you dont need to access the MSFC, your on it. Config your routing from global configuration mode.

So for ospf do:

Core_1#conf t

Core_1(config)# router ospf 1

Core_1(config-router)# blah

View solution in original post

If it is in native mode, you are in RP(MSFC) now. If you want to log into SP, you can try "remote login switch"

View solution in original post

10 REPLIES 10
Giuseppe Larosa
Hall of Fame Master

Hello Chandhrasekar,

Sup II and MSFC talk via internal trunk 15/1

you need

session 15

from supervisor prompt to access the MSFC

Hope to help

Giuseppe

Hello Giuseppe,

I tried Session Slot 15 as well as Session 15 both did not work. It did not let me in the Router (MSFC)

Hi

My be a silly question but are you running in native mode, ie IOS on the SP and RP and RP takes control.

What prompt do you have

Type show version at your current prompt and paste the first few lines in here

Hi,

I am running in native mode. Here are the few lines from sh ver output

------

Core_1#sh ver

Cisco Internetwork Operating System Software

IOS (tm) s72033_rp Software (s72033_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(18)SXF6, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2006 by cisco Systems, Inc.

Compiled Mon 18-Sep-06 23:32 by tinhuang

Image text-base: 0x40101040, data-base: 0x42D90000

The you dont need to access the MSFC, your on it. Config your routing from global configuration mode.

So for ospf do:

Core_1#conf t

Core_1(config)# router ospf 1

Core_1(config-router)# blah

View solution in original post

Thanks. It resolved my issue

If it is in native mode, you are in RP(MSFC) now. If you want to log into SP, you can try "remote login switch"

View solution in original post

1, "show module" to check if MSFC is up and in OK status.

2, "show port 15/1" to make sure port 15/1 is not in err-disable status.

If both is OK, you might disable your vty session in your MSFC configuration. (Session 15 command will try to telnet to MSFC).

So you might have to use "switch console" command when you CONSOLE into the switch.

sh module results shows the MSFC status as OK.

Sh port 15/1 throws error.

I believe it throws error, as I am running in Native Mode (Cisco IOS)

Yeah, that's CatOS command since I thought you are in hybrid mode. :)

If it is native mode, you are already in MSFC.