cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
578
Views
5
Helpful
5
Replies
Rasika Nayanajith
VIP Mentor

How to differentiate WS-X6824-SFP-2T vs WS-X6824-SFP-2TXL ?

As part of RMA process got below card. How do I verify that is 2TXL ? Is there any CLI command to verify this? 

Looks like Factory ID label is wrong here (it is not definitely a 48 port card :-( ) 

Thanks

Rasika

2 ACCEPTED SOLUTIONS

Accepted Solutions
Leo Laohoo
VIP Community Legend

Flip the line card on it's back.  The correct PID should be a sticker.  It'll also determine if the line card is XL or plain. 

Another option is to invoke the command "sh module".  This is very useful if the DFC card was retrofitted.

View solution in original post

Yes, that's correct.  The "XL" in the DFC card is the one to look for. 

View solution in original post

5 REPLIES 5
Leo Laohoo
VIP Community Legend

Flip the line card on it's back.  The correct PID should be a sticker.  It'll also determine if the line card is XL or plain. 

Another option is to invoke the command "sh module".  This is very useful if the DFC card was retrofitted.

View solution in original post

Hi Leo,

Thanks for the response. On back side of line card I see below, not indicating it is XL

Below is the output of "show module" where a XL card is in. Does it shows it is WS-6824-SFP-2TXL or 2T?

DR01#sho module 
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
2 24 CEF720 24 port 1000mb SFP WS-X6824-SFP SAL16063VMY
3 16 CEF720 16 port 10GE WS-X6816-10GE SAL160743BQ
4 16 CEF720 16 port 10GE WS-X6816-10GE SAL160743BW
5 5 Supervisor Engine 2T 10GE w/ CTS (Acti VS-SUP2T-10G SAL16074G46
6 5 Supervisor Engine 2T 10GE w/ CTS (Hot) VS-SUP2T-10G SAL16084UB2
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
2 c464.1341.9ce0 to c464.1341.9e33 1.0 12.2(18r)S1 15.0(1)SY Ok
3 e8b7.4829.9df0 to e8b7.4829.9f0b 1.1 12.2(18r)S1 15.0(1)SY Ok
4 c464.1341.a128 to c464.1341.a243 1.1 12.2(18r)S1 15.0(1)SY Ok
5 588d.098a.d202 to 588d.098a.d33f 1.2 12.2(50r)SYS 15.0(1)SY Ok
6 588d.098a.d3a1 to 588d.098a.d4de 1.2 12.2(50r)SYS 15.0(1)SY Ok
Mod Sub-Module Model Serial Hw Status 
---- --------------------------- ------------------ ----------- ------- -------
2 Distributed Forwarding Card WS-F6K-DFC4-AXL SAL16020UZ2 1.1 Ok
3 Distributed Forwarding Card WS-F6K-DFC4-EXL SAL16041SEU 1.1 Ok
4 Distributed Forwarding Card WS-F6K-DFC4-EXL SAL16041SFK 1.1 Ok
5 Policy Feature Card 4 VS-F6K-PFC4XL SAL16074DNW 1.0 Ok
5 CPU Daughterboard VS-F6K-MSFC5 SAL16074A36 1.3 Ok
6 Policy Feature Card 4 VS-F6K-PFC4XL SAL16084USD 1.0 Ok
6 CPU Daughterboard VS-F6K-MSFC5 SAL16084WQ7 1.3 Ok

HTH

Rasika

I think XL in that submodule indicating that

Mod Sub-Module Model Serial Hw Status 
---- --------------------------- ------------------ ----------- ------- -------
2 Distributed Forwarding Card WS-F6K-DFC4-AXL SAL16020UZ2 1.1 Ok

HTH

Rasika

Yes, that's correct.  The "XL" in the DFC card is the one to look for. 

View solution in original post

Thanks for the ratings, Rasika.