how to limit bandwidth on nexus 9ks

[Deepakmanne7890]

HI all ,
As we did bandwidth control on cisco routers and we are willing to do same for 9ks , i would like to know the configs to implement same on 9ks :

below are the configs we add on router :

class-map match-any TINA-DATA
match access-group name TINA
!
policy-map POLICE-TINA-INET
class TINA-DATA
police cir 300000000 conform-action transmit exceed-action drop violate-action drop

thank you 

[Reza Sharifi]

Hi,

Here is a document detailing QoS config and bandwidth reservation.

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/qos/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Quality_of_Service_Configuration_Guide/b_Cisco_Nexus_9000_Series_NX-OS_Quality_of_Service_Configuration_Guide_chapter_0...

HTH

[Deepakmanne7890]

will above configs work with 9k as well ?

[Reza Sharifi]

Usually, the QOS config is not the same across different platforms. So, come commands may work and some may not. You would have to refer to the config guide.

HTH

[Deepakmanne7890]

HI reza ,
thanks for your reply , i have tried different combinations but no luck , am looking for exact configs that works on 9ks .