How to Tag Vlan on trunk ports

[Khaleelur Rahman]

Hi,

How to tag one VLAN on trunk port in Cisco switches.

here by i have attached the screen of the requirement.

please help me with configuration commands.

Thnak you.

[Julio E. Moisa · Accepted solution]

Hi

The vlan id is included into the header, now if you want to specify the VLAN passing through over a trunk so you can use the following line:

interface gx/x/x

switchport mode trunk

switchport trunk allowed vlan 901

no shutdown

The vlan 901 should be created on both switches. 

conf t

vlan 901

name MANAGEMENT

Hope is is useful

[Abheesh Kumar · Accepted solution]

Hi,

Vlan 901
name 901
!
interface Vlan901
ip address 10.66.127.240 255.255.255.0

!
interface Port-channel10
description --UPLINK---
switchport trunk allowed vlan 901
!
interface GigabitEthernet1/0/1
switchport access vlan 901
!

HTH

Abheesh