cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
291
Views
10
Helpful
2
Replies
Highlighted
Beginner

HSRP Multiple tracking

Hello All,

 

As per the below design , if we have 2 core switch , each core connected to a different PE and each has 2 OSPF Adj , Core 1 is the active what i want to accomplish is:-

 

-On Active , Configure IP sla for 10.10.10.1 and 10.10.11.1 and track them , if 10.10.10.1 fail and 10.10.11.1 is reachable decrement the hsrp priority , if 10.10.10.1 fails and 10.10.11.1 is reachable decrement the hsrp priority so basically if any of the neighbor adj fails the standby  would take over , how can i accomplish this ? could someone advise with configuration so i can test it on my

emulator?

 

HSRP-TR.JPG

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
VIP Expert

you can track with more objects: example :

 

https://www.balajibandi.com/?p=1295

 



BB


*** Rate All Helpful Responses ***

View solution in original post

2 REPLIES 2
Highlighted
VIP Expert

you can track with more objects: example :

 

https://www.balajibandi.com/?p=1295

 



BB


*** Rate All Helpful Responses ***

View solution in original post

Highlighted

This solution is working, thank you

Content for Community-Ad