cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
528
Views
5
Helpful
3
Replies

HSRP Tracking Unable to create on 4510 SUP 8-E

roycemathew
Level 1
Level 1

hi All, Have a strange issue with one of my WS-C4510R+E. Unable to create a track object for HSRP tracking.

 

IOS: cat4500es8-universalk9.SPA.03.03.02.XO.151-1.XO2.bin,1

SUP: WS-X45-SUP8-E

Switch(config-if)#standby 8 track gigabitEthernet 2/1 10
% Interface may already be tracked via tracking command

Switch(config)#trac?
% Unrecognized command

 

Can someone help with me here.

 

 

3 Replies 3

Ganesh Hariharan
VIP Alumni
VIP Alumni

Hi,

Check out the below link on 4500 SUP8E for SLA tracking support.

 

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/release/note/OL_29983-01.html

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/product_bulletin_c25_468227.html

Hope that Helps..

-GI

Rate of that Helps

 

All section for IPBase says YES.

The License level is matching and supports FHRP, don't know why its not allowing me to configure track object.

Hi,

 

Are you sure no tracking configuration is already configured on switch.

 

It is strange with IP base licence level it should support enhanced tracking configuration.

 

--GI

Review Cisco Networking for a $25 gift card