03-11-2015 09:54 AM - edited 03-07-2019 11:03 PM
Hi All
My switch configuration are below
sw1:
interface Vlan12
ip address 10.0.12.2 255.255.255.0
standby 12 ip 10.0.12.1
standby 12 priority 200
standby 12 preempt
end
sw2:
interface Vlan12
ip address 10.0.12.3 255.255.255.0
standby 12 ip 10.0.12.1
standby 12 priority 200
standby 12 preempt
end
The problem i cannot reach virtual ip or 10.0.12.2 . But i can ping 10.0.12.3
How can i troubleshoot this ? . What all i have to consider
Thank you
03-11-2015 10:03 AM
if you show interface vlan 12, where 10.0.12.2 resides, does it show up?
Can you ping 10.0.12.2 from the local switch, where that Ip resides?
Here is a link to a HSRP troubleshooting guide.
http://www.cisco.com/c/en/us/support/docs/ip/hot-standby-router-protocol-hsrp/10583-62.html
03-11-2015 01:30 PM
Can you do a sh standby on both switches and post it? Also...........Why are both your priorities the same?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: