Is anyone ran in to this problem. I have those 9 port switch cards installed in 2921 router and in several different occasions my multicast source would go inactive sometime intermittently and other time permanently. Rebooting the Router always fix the problem. I have also noticed in couple occasions a port would dead and the end device connected would not respond to anything. If I connect on a local port on the same switch it is working I can communicate with the dead port. It seems like the router won't talk to the switch port and again if I reload the router the problem goes away. I have 60 of those routers with that 9 port switch card and I have multiple strange problem and all of the seem related to some problem with the router communicating with its switch card intermittently. I run ISO 15.2 in my Cisco 2921.
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.
Introduction to SD-Access Multicast
The document describes the Cisco DNAC UI workflow introduced as part of the Cisco DNA Center1.3.3 release. The document covers the components of Multicast forwarding on SD-Access fabric and the configuration pushed to...
Coming soon - Be the first to know about the New Product/Release Series. Join Customer Connection to register for the briefings throughout the month of October!
Membership in the Cisco Customer Connection program is required to attend. Registra...