Hi Miriam,
Please see the below procedure to change the password for the this switch,
- Connect to Cisco 3750 with the Console Cable at it’s original settings
- Unplug the power cable
- Power On the switch Cisco 3750
- Press Mode, bring it to the switch: prompt:
- Issue the switch: flash_init
- Issue the switch: load_helper
- Issue switch: dir flash: (Make sure to type a colon ":" after the dir flash)
- Then the switch file system is displayed
switch: dir flash:
Directory of flash:/ 2 -rwx 1803357 c3500xl-c3h2s-mz.120-5.WC7.bin
4 -rwx 1131 config.text
- Type switch: rename flash:config.text flash:config.text.old
- Issue the switch: boot
- Continue with the configuration dialog? [yes/no]: N
- At the switch prompt, type Switch> enable
- Type Switch# rename flash:config.text.old flash:config.text
- Copy the the configuration file into memory Switch# copy flash:config.text system:running-config
- Overwrite the current passwords that you do not know. Choose a strong password
Switch# conf t
Switch(config)# enable secret
--- To overwrite existing vty password
Switch(config)#line vty 0 15
Switch(config-line)#password
Switch(config-line)#login
--- To overwrite existing console password
Switch(config-line)#line con 0
Switch(config-line)#password
Switch(config)# exit
Switch# copy running-config startup-config
Refer:
http://www.cisco.com/en/US/products/hw/switches/ps628/products_password_recovery09186a0080094184.shtml
Regards,
Aru
Regards,
Aru
*** Please rate if the post useful ***