02-08-2012 02:11 PM - edited 03-07-2019 04:49 AM
Hi everybody - I reset my Cisco 2911 ISR to the factory defaults. I then used the configuration guide to do the initial set-up through the CLI. I was able to assign IPs to the GE0/0 and GE0/1 ports. Now I cannot access the GUI device manager at all. I was able to ping the IP of GE0/0 so I know the adapter took the IP assignment, but still no GUI access. Can anyone help me with this issue? I have spent hours trying to restore it, with no luck.
Any help at all is greatly appreciated. Thanks in advance.
Jeff Emerick
Elliptic Systems Corp.
Solved! Go to Solution.
02-08-2012 05:49 PM
Hi,
Have you enabled HTTP services?
see this link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmegui.html#wp1074455
HTH
02-08-2012 05:44 PM
Did you enable http server on the router? You may need to create a username and password on the router.
Hope this helps
Eugen
02-09-2012 08:24 AM
Hi Eugen - Thanks for the help I really appreciate it.
02-08-2012 05:49 PM
Hi,
Have you enabled HTTP services?
see this link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmegui.html#wp1074455
HTH
02-09-2012 08:31 AM
Hi Reza - Thanks for the help, I really appreciate it.
I followed the link you provided, and I see that the page it goes to is in the Unified Communication section of the Cisco website. Does this apply to a router that isn't doing anything other than basic Layer 3 routing?
I will implement this ASAP.
Thanks again,
Jeff
02-09-2012 09:38 AM
Jeff
Yes. The page may have come from Unified Communications but the function that it is talking about is used by very many different processing environments and is not limited to Unified Communications.
HTH
Rick
02-09-2012 10:08 AM
Thanks to everyone who helped answer these questions. I will post back what happens after I implement them. Thanks again.
02-23-2012 12:31 PM
It worked!!!! Thanks to everyone for their help in solving this matter.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide