cancelar
Mostrar resultados para 
Pesquisar em vez de 
Queria dizer: 
cancel
652
Apresentações
0
Útil
1
Respostas

IE2000 Industrial Switch Smartport Ethernetip Error

echo3whiskey
Level 1
Level 1

While configuring the switch and attempting to assign the Cisco Ethernet/IP macro to a port I get the following:

Error: Cisco Ethernetip port role is applied to one or more ports, but Recommended System Setup is disabled. <Screenshot attached>

From the web interface, there is a recommended system setup checkbox on the tab.  I've tried checking it and submitting, checking-choosing port roles-submitting, and multiple other gyrations.

If I use Cisco Network Assistant, I get a dialog: Warning: Smartports The global macros were only partially applied.  Choose Configure>Smartports>Device Setup on the feature bar to apply the global macros to the device. <Screenshot attached>

Same story, I try doing what it says and I get the same persistent error.

From the CLI (which I not an expert with) it appears to me that the correct global macros are applied and each interface has the cisco-ethernetip macro applied. <screenshot attached>

So I assume that everything is actually set up as I want, but the fact that I keep getting those warnings/errors bothers me.  Like I still have a problem hanging.

 

IE2000 Series Industrial Ethernet Switch (IE-2000-16TC-L).

1 RESPOSTA 1

echo3whiskey
Level 1
Level 1

So, no one ever answered this, but I solved my own problem.  The product I purchased only included the Lan Lite license level.  The Lan Base level is required to use the macros.

Review Cisco Networking for a $25 gift card