cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
581
Views
0
Helpful
1
Replies

IE2000 skipping post tests

James Sheridan
Level 1
Level 1

I have a few brand new out of box Cisco IE2000 switches, and during the post, it's running a few tests, and finishing off with a status of "Skipped". Is this normal, or something I should be concerned about. Why would it be skipping these tests.

POST: PortASIC Memory Tests : Begin
POST: PortASIC Memory Tests : End, Status Skipped

POST: CPU MIC interface Loopback Tests : Begin
POST: CPU MIC interface Loopback Tests : End, Status Skipped

POST: PortASIC RingLoopback Tests : Begin
POST: PortASIC RingLoopback Tests : End, Status Skipped

POST: PortASIC CAM Subsystem Tests : Begin
POST: PortASIC CAM Subsystem Tests : End, Status Skipped

POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Skipped

 

Thanks

 

1 Reply 1

Hello,

 

the below is a sample of the normal boot procedure. If yours looks like the below, your device is working fine:

 

Loading "sdflash:/ie2000-universalk9-mz.152-4.EA1/ie2000-universalk9-mz.152-4.EA1.bin"...#########################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################
##############################################################################################################################################################################################################################################################################################################################

File "sdflash:/ie2000-universalk9-mz.152-4.EA1/ie2000-universalk9-mz.152-4.EA1.bin" uncompressed and installed, entry point: 0x3000
executing...

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Cisco IOS Software, IE2000 Software (IE2000-UNIVERSALK9-M), Version 15.2(4)EA1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Tue 29-Mar-16 09:10 by prod_rel_team
Initializing flashfs...
Using driver version 4 for media type 1
mifs[4]: 10 files, 1 directories
mifs[4]: Total bytes : 1806336
mifs[4]: Bytes used : 688640
mifs[4]: Bytes available : 1117696
mifs[4]: mifs fsck took 0 seconds.
mifs[4]: Initialization complete.

mifs[5]: 0 files, 1 directories
mifs[5]: Total bytes : 3870720
mifs[5]: Bytes used : 1024
mifs[5]: Bytes available : 3869696
mifs[5]: mifs fsck took 0 seconds.
mifs[5]: Initialization complete.

mifs[6]: 5 files, 1 directories
mifs[6]: Total bytes : 258048
mifs[6]: Bytes used : 10240
mifs[6]: Bytes available : 247808
mifs[6]: mifs fsck took 1 seconds.
mifs[6]: Initialization complete.

mifs[7]: 5 files, 1 directories
mifs[7]: Total bytes : 258048
mifs[7]: Bytes used : 10240
mifs[7]: Bytes available : 247808
mifs[7]: mifs fsck took 0 seconds.
mifs[7]: Initialization complete.

mifs[8]: 573 files, 11 directories
mifs[8]: Total bytes : 57931776
mifs[8]: Bytes used : 49542656
mifs[8]: Bytes available : 8389120
mifs[8]: mifs fsck took 1 seconds.
mifs[8]: Initialization complete.

...done Initializing flashfs.
Checking for Bootloader upgrade..
Boot Loader upgrade not needed(v)

POST: CPU MIC register Tests : Begin
POST: CPU MIC register Tests : End, Status Skipped

POST: PortASIC Memory Tests : Begin
POST: PortASIC Memory Tests : End, Status Skipped

POST: CPU MIC interface Loopback Tests : Begin
POST: CPU MIC interface Loopback Tests : End, Status Skipped

POST: PortASIC RingLoopback Tests : Begin
POST: PortASIC RingLoopback Tests : End, Status Skipped

Upgrading Jeeves FPGA firmware...
%Error stat'ing ucode0:jeevesfpga.rbf (No such file or directory)
Jeeves FPGA Upgrade failed...
Loading Jeeves FPGA Golden Image...
FPGA version 0.14 downloaded successfully
Using driver version 4 for media type 1
Base ethernet MAC Address: 78:da:6e:c1:6f:80
Xmodem file system is available.
The password-recovery mechanism is enabled.
Initializing Flash...
mifs[2]: 10 files, 1 directories
mifs[2]: Total bytes : 1806336
mifs[2]: Bytes used : 688640
mifs[2]: Bytes available : 1117696
mifs[2]: mifs fsck took 0 seconds.
mifs[3]: 0 files, 1 directories
mifs[3]: Total bytes : 3870720
mifs[3]: Bytes used : 1024
mifs[3]: Bytes available : 3869696
mifs[3]: mifs fsck took 0 seconds.
mifs[4]: 5 files, 1 directories
mifs[4]: Total bytes : 258048
mifs[4]: Bytes used : 10240
mifs[4]: Bytes available : 247808
mifs[4]: mifs fsck took 0 seconds.
mifs[5]: 5 files, 1 directories
mifs[5]: Total bytes : 258048
mifs[5]: Bytes used : 10240
mifs[5]: Bytes available : 247808
mifs[5]: mifs fsck took 1 seconds.
mifs[6]: 573 files, 11 directories
mifs[6]: Total bytes : 57931776
mifs[6]: Bytes used : 49542656
mifs[6]: Bytes available : 8389120
mifs[6]: mifs fsck took 0 seconds.
...done Initializing Flash.
done.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card