08-01-2011 03:07 AM - edited 03-07-2019 01:29 AM
Hi,
Has anybody heard of any problems with the newest c3560-ipbasek9-mz.122-5.SE3.bin image? I'm thinking about using it.
Thank, Pat
Solved! Go to Solution.
08-01-2011 04:54 AM
Patrick,
You are probably talking about 12.2(55)SE3. From my perspective, there are no issues I would run into and have some problems with. Certainly, you should could the Release notes to see what caveats have been resolved and which are still open:
I hope other friends here will contribute their experiences with the 12.2(55)SE3 on 3560 series Catalysts.
Best regards,
Peter
08-01-2011 06:23 AM
Hi,
Image has been in market for a while. So you can consider it for your network.
You can check the open and resolved caveats i the below link:
Cheers
Sweta
p.s. please rate the content if it was useful and mark the question answered.
08-01-2011 04:54 AM
Patrick,
You are probably talking about 12.2(55)SE3. From my perspective, there are no issues I would run into and have some problems with. Certainly, you should could the Release notes to see what caveats have been resolved and which are still open:
I hope other friends here will contribute their experiences with the 12.2(55)SE3 on 3560 series Catalysts.
Best regards,
Peter
08-01-2011 06:23 AM
Hi,
Image has been in market for a while. So you can consider it for your network.
You can check the open and resolved caveats i the below link:
Cheers
Sweta
p.s. please rate the content if it was useful and mark the question answered.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide