cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2157
Views
5
Helpful
1
Replies

Incrementing throttles and ignored Vlan

spinning2008
Level 1
Level 1

Hi all,

I have a Cisco WS-C2950-48,  and I have incrementing throttles and ignored on  VLAN 1 interface.  Vlan 1 is a managament interface, some time

when I try to Access I can't.

2950#show int vlan 1

Vlan1 is up, line protocol is up

  Internet address is 10.0.0.146/16

  MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,

     reliability 255/255, txload 1/255, rxload 1/255

  Encapsulation ARPA, loopback not set

  ARP type: ARPA, ARP Timeout 04:00:00

  Last input 00:00:00, output never, output hang never

  Last clearing of "show interface" counters never

  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0

  Queueing strategy: fifo

  Output queue: 0/40 (size/max)

  30 second input rate 36000 bits/sec, 52 packets/sec

  30 second output rate 17000 bits/sec, 23 packets/sec

     297870558 packets input, 1596814696 bytes, 0 no buffer

     Received 195554838 broadcasts (0 IP multicast)

     0 runts, 0 giants, 1607875 throttles

     0 input errors, 0 CRC, 0 frame, 0 overrun, 98455174 ignored

     76743540 packets output, 3185572576 bytes, 0 underruns

     0 output errors, 2 interface resets

     0 output buffer failures, 0 output buffers swapped out

Clients are not having any troubles.

CPU utilization it's OK.

Thanks in advance.

1 Reply 1
Review Cisco Networking products for a $25 gift card