cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
201
Views
0
Helpful
4
Replies
Highlighted
Beginner

Input Discard

Hi Team,

 

I am observing input discard,CRC,and input errors on my nexus(Nexus 5696 ) interface.

sh int et2/5

MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec
reliability 255/255, txload 5/255, rxload 1/255

0 runts 0 giants 15098 CRC 0 no buffer
15098 input error 0 short frame 0 overrun 0 underrun 0 ignored
0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
0 input with dribble 14335 input discard
0 Rx pause

 

The other end of the device is connected to 4500x chassi where not observing any interface errors.

I had changed Transceiver and Cable but still observing errors.

Can any one help to resolve the issue.

4 REPLIES 4
Highlighted
Hall of Fame Expert

Re: Input Discard

Hi,

Do you see the same issue if you connect the cable to a different port e.g e2/6?

HTH

Highlighted
Beginner

Re: Input Discard

Not observing .

 

But observed Rx stomped packet count is incrementing.

RX_PKT_CRC_NOT_STOMPED | 12888244 | 12888238 | 3
RX_PKT_CRC_STOMPED | 0 | 0 | 0

Highlighted
Hall of Fame Expert

Re: Input Discard

Can you provide the config for the port with issue?

sh run int tex/x

sh int tex/x

Is jumbo frame enabled on the switch?

HTH

Highlighted
Beginner

Re: Input Discard

 
CreatePlease to create content
Content for Community-Ad