I am in a very confused situation where I cannot ping to VLANs on the same layer 3 (6509) switch.
There are 4 vlans on the switch: Ex:
vlan 220 (10.222.1.1/24)
vlan 200 (10.140.1.1/24)
and vlan 300 (10.129.50.1/24)
Routing: eigrp routing for network 10.0.0.0 network.
PROBLEM: All vlans can ping to each other except for vlan 300. Maximum ports are on vlan 100 and some are on other VLANs. Interface 7/1, 7/2 are on vlan 300. Config of 7/1 adn 7/2 is:
switchport mode access
switchport access vlan 300
I do not have any trunk ports as routing is already there. Any ideas and help is very much appreciated.
Solved! Go to Solution.
Thanks, although I must admit I am unsure of exactly what happens to control plane traffic on an access link between two switches.
Can't help feeling I should know and the answer is obvious :-)