hi to all
I was doing intervlan routing ,,, i used 2600 router and 2900 series
i create two vlan... vlan 2 and vlan 3
on router i create three subinterfaces.. .
interface 0/0.1 for vlan 1 ip address 192.168.1.1 255.255.255.0
interface 0/0.2 for vlan 2 ip address 192.168.2.1 255.255.255.0
interface 0/0.3 for vlan 3 ip address 192.1683.1 255.255.255.0
with proper encapsultation
i used a straight cable to join switch and router.. and create a trunk port in switch
every thing is working fine pcs from vlan 2 can ping pcs from vlan 3
then i put the twist
and instead of straight through cable i used a pair of wireless bridges of brand powerstation
now each vlan can ping its gateway and others gateway too
but cannot ping pcs in other vlan....
now i dont whats the problem
so i came for help from the experts... plz kindly help me out...this is basically RnD not a job task
Regard