I have 2 Chassis 6506-E with sup 720. one of them work properly(Switch1) but another(Switc2) not boot form bootdisk and go to ROMMON mode. I Captured IOS from Switch1 with tftp but I cant Copy this image to switch 2 with tftp.
Please help me what should I do?
You can't use TFTP on the 2nd supervisor card. The fastest way is to copy the IOS from the 1st Supervisor card to a CF. Eject the CF from the 1st Supervisor card, and insert into the 2nd Supervisor card and, in ROMmon, tell the 2nd Supervisor card to boot the IOS from the CF.
in the RMON prompt ,type command boot disk0:
ensure you have CF installed disk 0 and have proper IOS in it
Rommon 1 > dev
Devices in device table:
bootdisk: boot disk
disk0: PCMCIA Disk 0
disk1: PCMCIA Disk 1
Chek for proper IOS
rommon 2 > dir disk0:
Initializing ATA monitor library...
Directory of disk0:
2 124931652 -rw- c7600s72033-adventerprisek9-mz
7628 29351936 -rw- c7600-fpd-pkg.122-33.SRE5.pkg
rommon 3> boot disk0:c7600s72033-adventerprisek9-mz.122-33.SRE5.bin