07-11-2013 02:05 AM - edited 03-07-2019 02:20 PM
Hi All,
I am using cisco 3750G switch i have got two images in flash, I want to make second image as my defeult boot image, how do i do that ?
Any help will be much appriciated.
Many thanks,
Kamran.
Solved! Go to Solution.
07-11-2013 03:44 AM
:-)
07-11-2013 03:49 AM
Hi,
Thank you ever so much guys it is working !!!!!!
much appriciated for your time.
Many thanks.
Kamran.
07-11-2013 03:56 AM
welcome, Kamran!
03-26-2024 02:58 AM
Hi Ivan ,
I am using C-2960X series switch on my production environment .
I have uploaded the following image from tftp c2960x-universalk9-mz.152-7.E9.bin on the switch and made the boot sequence done by executing following commands .
boot-start-marker
boot system flash:c2960x-universalk9-mz.152-7.E9.bin >> New uploaded image
boot system flash:c2960x-universalk9-mz.152-7.E7.bin >>> Existing Image
boot-end-marker
But when i see the running config there is no boot sequence present as above . for other device like ISR router i can see boot sequencing is working as expected .
03-26-2024 02:58 AM
I am using C-2960X series switch on my production environment .
I have uploaded the following image from tftp c2960x-universalk9-mz.152-7.E9.bin on the switch and made the boot sequence done by executing following commands .
boot-start-marker
boot system flash:c2960x-universalk9-mz.152-7.E9.bin >> New uploaded image
boot system flash:c2960x-universalk9-mz.152-7.E7.bin >>> Existing Image
boot-end-marker
But when i see the running config there is no boot sequence present as above . for other device like ISR router i can see boot sequencing is working as expected .
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide