cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

1891
Views
5
Helpful
1
Replies
Highlighted
Frequent Contributor

IOS K9 catalist 4507R+E question

           Hi all,

We have 4507R 

Core4507#sh inv

NAME: "Switch System", DESCR: "Cisco Systems, Inc. WS-C4507R+E 7 slot switch "

PID: WS-C4507R+E       , VID: V02  , SN: FOX1543HEHT

NAME: "Clock Module", DESCR: "Clock Module"

PID: WS-X4K-CLOCK-E    , VID: V01  , SN: NWG15380104

NAME: "Mux Buffer 1 ", DESCR: "Mux Buffers for Redundancy Logic"

PID: WS-X4590-EX=      , VID:      , SN: NWG154003LS

NAME: "Mux Buffer 2 ", DESCR: "Mux Buffers for Redundancy Logic"

PID: WS-X4590-EX=      , VID:      , SN: NWG154004JU

NAME: "Mux Buffer 5 ", DESCR: "Mux Buffers for Redundancy Logic"

PID: WS-X4590-EX=      , VID:      , SN: NWG154004D1

NAME: "Mux Buffer 6 ", DESCR: "Mux Buffers for Redundancy Logic"

PID: WS-X4590-EX=      , VID:      , SN: NWG15400440

NAME: "Mux Buffer 7 ", DESCR: "Mux Buffers for Redundancy Logic"

PID: WS-X4590-EX=      , VID:      , SN: NWG154004RZ

NAME: "Linecard(slot 1)", DESCR: "10/100/1000BaseT (RJ45) with 48 10/100/1000 baseT "

PID: WS-X4648-RJ45-E   , VID: V02  , SN: JAE155008V5

NAME: "Linecard(slot 3)", DESCR: "Sup 7-E 10GE (SFP+), 1000BaseX (SFP) with 4 SFP+ Ports"

PID: WS-X45-SUP7-E     , VID: V02  , SN: CAT1551L014

NAME: "TenGigabitEthernet3/1", DESCR: "1000BaseSX"

PID: Unspecified       , VID:      , SN: FNS152915Y5

NAME: "TenGigabitEthernet3/2", DESCR: "1000BaseSX"

PID: Unspecified       , VID:      , SN: FNS15290JSD

NAME: "TenGigabitEthernet3/3", DESCR: "1000Base-BX10-U"

PID: Unspecified       , VID:      , SN: MD2UR019

NAME: "TenGigabitEthernet3/4", DESCR: "1000Base-BX10-U"

PID: Unspecified       , VID:      , SN: MD2UR021

NAME: "Fan", DESCR: "FanTray"

PID: WS-X4597+E        , VID: V02  , SN: FOX1542G4W4

NAME: "Power Supply 1", DESCR: "Power Supply ( AC 1400W )"

PID: PWR-C45-1400AC    , VID: V04  , SN: DTM153705GU

NAME: "Power Supply 2", DESCR: "Power Supply ( AC 1400W )"

PID: PWR-C45-1400AC    , VID: V04  , SN: DTM153705H1

Core4507#

Core4507#sh license all

License Store: Primary License Storage

StoreIndex: 0 Feature: ipbase  Version: 1.0

      License Type: Permanent

      License State: Active, In Use

      License Count: Non-Counted

      License Priority: Medium

License Store: Dynamic License Storage

StoreIndex: 0 Feature: entservices  Version: 1.0

      License Type: Evaluation

        Evaluation total period: 8 weeks 4 days

        Evaluation period left: 8 weeks 4 days

      License State: Active, Not in Use, EULA not accepted

      License Count: Non-Counted

      License Priority: None

Core4507#

Core4507#sh bootflash:

-#- --length-- ---------date/time--------- path

  1   86771191 Dec 29 2011 12:46:34 +00:00 cat4500e-universal.SPA.03.02.00.SG.150-2.SG.bin

  2  115918536 Sep 07 2012 17:38:18 +00:00 cat4500e-universalk9.SPA.03.03.01.SG.151-1.SG1.bin

586309632 bytes available (202989568 bytes used)

Core4507#

Core4507#sh run

!

boot-start-marker

boot system flash bootflash:cat4500e-universalk9.SPA.03.03.01.SG.151-1.SG1.bin

boot-end-marker

I need to load image cat4500e-universalk9.SPA.03.03.01.SG.151-1.SG1.bin
but after reload it dosnt. it loads cat4500e-universal.SPA.03.02.00.SG.150-2.SG.bin

Core4507#sh ver

Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.02.00.SG RELEASE

SOFTWARE (fc4)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2011 by Cisco Systems, Inc.

Compiled Tue 26-Apr-11 18:09 by prod_rel_team

Cisco IOS-XE software, Copyright (c) 2005-2010 by cisco Systems, Inc.

All rights reserved.  Certain components of Cisco IOS-XE software are

licensed under the GNU General Public License ("GPL") Version 2.0.  The

software code licensed under GPL Version 2.0 is free software that comes

with ABSOLUTELY NO WARRANTY.  You can redistribute and/or modify such

GPL code under the terms of GPL Version 2.0.  For more details, see the

documentation or "License Notice" file accompanying the IOS-XE software,

or the applicable URL provided on the flyer accompanying the IOS-XE

software.

Image text-base: 0x100A0994, data-base: 0x13CAB728

ROM: 15.0(1r)SG2

Jawa Revision 7, Snowtrooper Revision 0x0.0x116

Core4507 uptime is 2 days, 21 hours, 50 minutes

Uptime for this control processor is 2 days, 21 hours, 52 minutes

System returned to ROM by power-on

System restarted at 11:08:03  Sat Sep 15 2012

Running default software                           ---------- why?

License Information for 'WS-X45-SUP7-E'

    License Level: ipbase   Type: Permanent

    Next reboot license Level: ipbase

cisco WS-C4507R+E (MPC8572) processor (revision 8) with 2097152K/20480K bytes of memory.

Processor board ID FOX1543HEHT

MPC8572 CPU at 1.5GHz, Supervisor 7

Last reset from PowerUp

9 Virtual Ethernet interfaces

48 Gigabit Ethernet interfaces

4 Ten Gigabit Ethernet interfaces

511K bytes of non-volatile configuration memory.

Configuration register is 0x2101

Maybe I have to purchase license to use K9 image?

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

IOS K9 catalist 4507R+E question

Hi,

If you see that the configuration register is set as 0x2101. Usually from the factory the config register is 0x2101 which means it loads the first image it finds in flash regardless of the boot statement you try to use.

cisco WS-C4507R+E (MPC8572) processor (revision 8) with 2097152K/20480K bytes of memory.

Processor board ID FOX1543HEHT

MPC8572 CPU at 1.5GHz, Supervisor 7

Last reset from PowerUp

9 Virtual Ethernet interfaces

48 Gigabit Ethernet interfaces

4 Ten Gigabit Ethernet interfaces

511K bytes of non-volatile configuration memory.

Configuration register is 0x2101

When you do a "sh bootflash: the image that is on top is the one that will load with a 0x2101 register. In this case you have old image is in first entry. Hence it ingore your boot statement and load first image it finds from bootflash.

Core4507#sh bootflash:

-#- --length-- ---------date/time--------- path

  1   86771191 Dec 29 2011 12:46:34 +00:00 cat4500e-universal.SPA.03.02.00.SG.150-2.SG.bin

  2  115918536 Sep 07 2012 17:38:18 +00:00 cat4500e-universalk9.SPA.03.03.01.SG.151-1.SG1.bin

586309632 bytes available (202989568 bytes used)

Suggestion:

Please change the config register as 0x2102 which will use the image you specify in the boot statement

http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a008022493f.shtml

Regards,

Aru

*** Please rate if the post is useful ***

Regards, Aru *** Please rate if the post useful ***

View solution in original post

1 REPLY 1
Cisco Employee

IOS K9 catalist 4507R+E question

Hi,

If you see that the configuration register is set as 0x2101. Usually from the factory the config register is 0x2101 which means it loads the first image it finds in flash regardless of the boot statement you try to use.

cisco WS-C4507R+E (MPC8572) processor (revision 8) with 2097152K/20480K bytes of memory.

Processor board ID FOX1543HEHT

MPC8572 CPU at 1.5GHz, Supervisor 7

Last reset from PowerUp

9 Virtual Ethernet interfaces

48 Gigabit Ethernet interfaces

4 Ten Gigabit Ethernet interfaces

511K bytes of non-volatile configuration memory.

Configuration register is 0x2101

When you do a "sh bootflash: the image that is on top is the one that will load with a 0x2101 register. In this case you have old image is in first entry. Hence it ingore your boot statement and load first image it finds from bootflash.

Core4507#sh bootflash:

-#- --length-- ---------date/time--------- path

  1   86771191 Dec 29 2011 12:46:34 +00:00 cat4500e-universal.SPA.03.02.00.SG.150-2.SG.bin

  2  115918536 Sep 07 2012 17:38:18 +00:00 cat4500e-universalk9.SPA.03.03.01.SG.151-1.SG1.bin

586309632 bytes available (202989568 bytes used)

Suggestion:

Please change the config register as 0x2102 which will use the image you specify in the boot statement

http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a008022493f.shtml

Regards,

Aru

*** Please rate if the post is useful ***

Regards, Aru *** Please rate if the post useful ***

View solution in original post

CreatePlease to create content
Content for Community-Ad