IP cache Flow egress on 4321

[scottsassin]

I have recently upgraded our routers from 2811 to 4321 series. Both running advanced IP services.

I can't seem to get IP cache flow working on the interfaces. The configuration I had on the 2811 was ip cache flow egress/ingress. The 4321 doesn't have this command.

I really need to do a show ip cache flow, to see traffic entering or leaving an interface.

Thanks,

Scott

[Reza Sharifi · Accepted solution]

The commands are different.

show flow monitor ...

here is a link for more info:

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/fnetflow/configuration/15-mt/fnf-15-mt-book/cgf-topn.html#GUID-0340CBF8-EBAE-448D-B119-B345243C94C5

HTH