cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
480
Views
0
Helpful
0
Replies

IP NAT Stateful IOS 15.4 C3945

Robert Singer
Level 1
Level 1

Hi there,

 

I am curios about where the "ip nat stateful" command went. We upgraded a Cisco CISCO3945

from

c3900-universalk9-mz.SPA.151-4.M2.bin

to

c3900-universalk9-mz.SPA.154-3.M2.bin 

 

after the reboot, some ip nat commandos are missing like

 

ip nat inside source static 10.228.2.49 10.89.16.19 vrf POI mapping-id 10 

 

...we conclude that in version 15.4 the ip nat statful command is missing

within this subconfig we could snat with the id 10 as mentioned above.

 

Unfortunately, the command is not applicable in the new config. However I get a Command Context Auto fulfilment but this command do not made it's way into the running config.

 

Does anyone know, if this version has problem with snat?

 

Best Regards,

Robert

 

0 Replies 0
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: