cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2594
Views
5
Helpful
3
Replies

IP overlapping

RawaAmbrose2002
Level 1
Level 1

I had this for my exam today, given IP was 192.168.60.0/27 and had to subnet it for 6 networks based on the topology in the picture, after subnetting and getting new networks and using it for the routers overlapping would happen between them, and i dont know why or how to fix it, I DONT EVEN KNOW WHATS WRONG?

1 Accepted Solution

Accepted Solutions

You have divided main subnet to /30 segments. so when you configuring you should use 255.255.255.252 as subnet mask. if mistakenly subnet configured as 255.255.255.0, or any bigger segment sizes, that will overlap subnets.

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB

View solution in original post

3 Replies 3

Hi,

you may have configured subnet mask to wrong value mistakenly. 

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB

Could you elaborate a little more please? i would very appreciate it!

You have divided main subnet to /30 segments. so when you configuring you should use 255.255.255.252 as subnet mask. if mistakenly subnet configured as 255.255.255.0, or any bigger segment sizes, that will overlap subnets.

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB