11-13-2013 09:26 PM - edited 03-07-2019 04:35 PM
All
switch part number # WS-C3750X-48P-S
current License Level: ipbase
switch currently connected as a stack with three switches
I am planning to install license to make existing switch IP base to full L3 functionality that is IP services , just to make sure that I need to install license in all the switches I think yes ??, also would like to check while upgrading licensee
I need to break the existing stack , install licenese reload and connect again stack ?? or without breaking stack copy lic each switch flash and load once , since it is production switch bit concern .
Regards
Lerner
.
Solved! Go to Solution.
11-13-2013 10:36 PM
It seems that you should be able to download license to all the members and then from the master send command to make them boot with the new license. Don't forget to accept the EULA.
https://supportforums.cisco.com/message/3345903
Daniel Dib
CCIE #37149
11-13-2013 10:36 PM
It seems that you should be able to download license to all the members and then from the master send command to make them boot with the new license. Don't forget to accept the EULA.
https://supportforums.cisco.com/message/3345903
Daniel Dib
CCIE #37149
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: