"Note: When you have a WiSM installed on a switch that runs Cisco IOS Software Release 12.2.33SXI, defining a Port-Channel manually on the switch and applying it to the gigabit interfaces does not work. Auto-lag must be used."
this forces me to use the "wism module <slot> controller <1 or 2> " to configure the channel.
How do we do advanced port configurations like "mls qos" and "wrr-queue..." commands on these channels or the physical ports?
Is there a way with this release of IOS to not do automatic LAG?
>>the internal port-channels towards the two processors of the WISM will be LACP, no other way as far as I know.
Thats not what I was asking. I know that the WISM requires etherchannel with no way to turn it off like on a 4404. I am not trying to do that.
In versions of IOS prior to 12.2.33SXI, we created port channels manually to the WISM the same way you would on a ethernet line card module.
After 12.2.33SXI, you MUST use the supervisor "auto-LAG" feature which automatically creates the port channel with a seemingly random port channel number. All configuration to the port channel and the underlying GigE ports are done by the "wism" command on the supervisor.
I am hoping (perhaps in vain) that we can get the flexibility we had in older versions of 6k IOS.
Listen: https://smarturl.it/CCRS8E37Follow us: twitter.com/ciscochampionSometimes, situations require temporary fixes. Sometimes, the network becomes an afterthought in overall office design and planning. In either situation, it may require netw...
In this special edition of the Insider Series, we hear from Cisco partners who have taken steps to be more eco-friendly and sustainable. We hear what inspires ASHRAE, Southwire, Igor, and NTT to create a workplace that is centered around people and how th...
We know that the Type-1 LSA describes the link type connected to the router, the neighbor router and the subnet number.In this topology, assume we dont have a Type-2 LSA, so each router will create its own Type-1 LSA, the Type-1 LSA will describe the neig...
Here are some commonly asked questions and answers to help with your adoption of Cisco DNA Center Wireless. Subscribe to this post to stay up-to-date with the latest Q&A and recommended Ask the Experts (ATXs) sessions to attend.
Q. I have a Cisco Appl...
Why IETF changed and inverted OSPF Type-7 LSA VS Type-5 LSA election In RFC 3101 compared to OLD RFC 1587?Many people learns that the Type-7 LSA and Type-5 election (ON Versus OE routes) depends on RFC 3101 for NSSA published in 2003 and RFC 1587 for NSSA...